DC3-24v, 0.5-2A, 10pin Lacthing sensing Relay

Model:PL

Form 2C  DPDT  10Pins lacthing relay

Operating function:PL 1 coil lacthing;

 Size:14*9*5MM;

Application: Office equipment relay;Teaching audition equipment relay; Armamentarium relay;

Measuring instrument relay; Emulator relay;Safety alarm relay; Detector relay;

Max.switching current:2A;

Max.switching Voltage:220VDC,250VAC;

Max.switching power:60W;62.5VA;

Contact Arrangement: 2C(2Z) DPDT(B-M);

Contact Loading: 1A,2A/30VDC;0.5A/125VAC;

Voltage available:5V,12V,24V;

Product Detail

DPDT 2A 10pins lacthing relay-PL

 

Features

1.  IL Pitch Terminals .High Sensitivity :0.14W or 0.10W Nominal Power

2.  Conforms to FCC Part 68 1.5kV Surge and Dielectric 1000VAC

3.  Monostable or bistable relays Single and double Coil magnet latching Type available

4.  Application for Telecommunication Equipment,Office Equipment,Security Alarm Systems,       Measuring  instruments,MedicalMonitoring Equipment,Audio Visual Equipment, Flight   Simulator,Sensor Control

 

Ordering Information

P      L     12      W
1        2        3         4
1.  Part number  P
2. Operating function  NIL: Single Side Stable
L:1 Coil Latching; K:2 Coil Latching
3. Coil rated voltage(V)  DC:3,4.5,5,6,9,12,24
4. Contact material  NIL: AgPd W: AgNi

 

Contact Data

Contact Arrangement 2C DPDT(B-M)    (Bifurcated Crossbar)
Contact Material AgPd(Gold clad )   AgNi(Gold clad)
Contact Rating (resistive) 1A,2A/30VDC;  0.5A/125VAC
Max. Switching Power 60W 62.5VA                                                      Min. Switching load 0.01mA/10mV                                                                              Reference Value
Max. Switching Voltage 220VDC 250VAC                                              Max. Swit ching Curr ent:2A
Contact Resistance or
Voltage drop
≤50mΩ                                                               Item 4.12 of IEC 61810-7
Operation life Electrical 1A/30VDC 2×100,000 
0.5A/125VAC 1×100,000 Ag Ni 1×100,000       Item 4.30 of IEC 61810-7
Mechanical 100,000,000                                                       Item 4.31 of IEC 61810-7

CAUTION:
Relays previously tested or used above 10mA resistive at 6V maximum DC or peak AC open circuit are not recommended for subsequent use in low level applications.

 

Coil Parameter

Dash numbers Coil voltage
VDC
 
Coil resistance
±Ω10%
Pick up voltage VDC(max) (75%of rated
voltage )
Release voltage VDC(min)
(10% of rated voltage)
Coil power W Operate Time ms Release
/Reset Time
ms
Rated  Max.
P-003
P-004
P-005
P-006
P-009
P-012
3
4.5
5
6
9
12
7.5
11.25
12.5
15.0
22.5
30.0
64.3
144.6
178
257
579
1028
2.25
3.38
3.75
4.50
6.75
9.00
0.3
0.45
0.5
0.6
0.9
1.2
0.14 Approx.2
Approx.1
P-024 24 48.0 2880 18.0 2.4 0.20
1 Coil Latching  Reset(Max) Reset
PL-003
PL-004
PL-005
PL-006
PL-009
PL-012
3
4.5
5
6
9
12
8.7
13.0
14.5
17.4
26.1
34.8
90
202.5
250
360
810
1440
2.25
3.38
3.75
4.50
6.75
9.00
-2.25
-3.38
-3.75
-4.50
-6.75
-9.00
0.10 Approx.2
Approx.1
PL-024 24 57.6 3840 18.0 -18.0 0.15
2 Coil Latching Set Coil Reset Coil Reset(Max) Reset
PK-003
PK-004
PK-005
PK-006
PK-009
PK-012
3
4.5
5
6
9
12
6
9
10
12
18
24
45
101
125
180
405
720
45
101
125
180
405
720
2.25
3.38
3.75
4.50
6.75
9.00
2.25
3.38
3.75
4.50
6.75
9.00
 0.20 Approx.2

Approx.1

PK-024 24 36 1920 1920 18.0 18.0 0.30

CAUTION:
1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay.
2.Pickup and release(reset) voltage are for test purposes only and are not to be used as design criteria.
3.When latching relays are installed in equipment, the latch and reset coil should not be powered simultaneously. Coil should not be pulsed with less than the
nominal coil voltage and pulse width should be a minimum of three times the specified operate time of the relay. If these conditions are not followed, it
is possible for the relay to be in the magne-tically neutral position .

 

Characteristics

Electrostatic capacitance
Between open Contacts Approx.0.4pF Item 4.41 of IEC 61810-7
Between coil & Contacts Approx.0.9pF Item 4.41 of IEC 61810-7
Between Contact Poles Approx.0.2pF Item 4.41 of IEC 61810-7
Insulation Resistance 1000MΩ min (at 500VDC) Item 7 of IEC 60255-5
Dielectric Strength
Between open Contacts
Between coil & Contacts
Between Contact Poles
1000VAC 1min
1000VAC 1min
1000VAC 1min
Item 6 of IEC 60255-5
Item 6 of IEC 60255-5
Item 6 of IEC 60255-5
Surge Withstand Voltage
Between open Contacts
Between coil & Contacts
Between Contact Poles
1500V
1500V
2500V
FCC 68
FCC 68
FCC 68
Shock resistance Functional:500m/s² 11ms;
Survival:1000 m/s² 6ms
IEC 68-2-27 Test Ea
Vibration resistance 10Hz~55Hz Double amplitude
Functional 3mm Survival:5mm
IEC 68-2-6 Test Fc
Terminals strength 5N IEC 68-2-21 Test Ua1
Solderability 235°C±2°C    3s°C±0.5s°C
Temperature Range -40°C ~70°C (-40°C ~158°C ) IEC 68-2-20 Test Ta method 1
Mass Approx. 1.5g

 

Safety approvals

Safety approval UL&CUR T Ü  V
Load 1A,2A/30VDC, 0.5A/125VAC 1A/30VDC, 0.5A/125VAC

 

Inquiry