PL

Modelo: PL

Forma 2C DPDT 10Pins lacthing Relay

Función de funcionamiento: PL 1 bobina lacthing;

 Tamaño: 14 * 9 * 5m m;

Uso: relais del equipo de oficina; Equipo de enseñanza audición relé; Relé armamentarium;

Relé del instrumento de medición; Relé de emulación; Relé de alarma de seguridad; Relé del detector;

Corriente de Max. switching: 2A;

Voltaje de Max. switching: 220VDC, 250VAC;

Energía de Max. switching: 60W; 62.5 va;

Arreglo del contacto: 2C (2Z) DPDT (B-M);

Cargamento del contacto: 1A, 2A/30VDC; 0.5 A/125VAC;

Voltaje disponible: 5V, 12V, 24V;

Product Detail

DPDT 2A 10pins lacthing Relay-PL

 

Features
• DIL Pitch Terminals .High Sensitivity :0.14W or 0.10W Nominal Power
• Conforms to FCC Part 68 1.5kV Surge and Dielectric 1000VAC
• Monostable or bistable relays Single and double Coil magnet latching Type available
• Application for Telecommunication Equipment,Office Equipment,Security Alarm Systems, Measuring instruments, Medical Monitoring Equipment,Audio Visual Equipment, Flight Simulator,Sensor Control

 

Ordering Information
P      L     12      W
1       2      3        4
1.  Part number  P
2. Operating function  NIL: Single Side Stable
L:1 Coil Latching; K:2 Coil Latching
3. Coil rated voltage(V)  DC:3,4.5,5,6,9,12,24
4. Contact material  NIL: AgPd W: AgNi

 

Contact Data
Contact Arrangement 2C DPDT(B-M)    (Bifurcated Crossbar)
Contact Material AgPd(Gold clad )   AgNi(Gold clad)
Contact Rating (resistive) 1A,2A/30VDC;  0.5A/125VAC
Max. Switching Power 60W 62.5VA                                                                                                    Min. Switching load 0.01mA/10mV Reference Value
Max. Switching Voltage 220VDC 250VAC                                                                                            Max. Swit ching Curr ent:2A
Contact Resistance or
Voltage drop
≤50mΩ                                                                                                              Item 4.12 of IEC 61810-7
Operation life Electrical 1A/30VDC 2 105
0.5A/125VAC 1 105 Ag Ni 1 105                                                                    Item 4.30 of IEC 61810-7
Mechanical 100,000,000                                                                                                     Item 4.31 of IEC 61810-7

CAUTION:
Relays previously tested or used above 10mA resistive at 6V maximum DC or peak AC open circuit are not recommended for subsequent use in low level applications.

 

Coil Parameter
Dash numbers Coil voltage
VDC
  Coil resistance
10%
Pick up voltage VDC(max) (75%of rated
voltage )
Release voltage VDC(min)
(10% of rated voltage)
Coil power W Operate Time ms Release
/Reset Time
ms
Rated  Max.
P-003
P-004
P-005
P-006
P-009
P-012
P-024
3
4.5
5
6
9
12
24
7.5
11.25
12.5
15.0
22.5
30.0
48.0

64.3
144.6
178
257
579
1028
2880
2.25
3.38
3.75
4.50
6.75
9.00
18.0
0.3
0.45
0.5
0.6
0.9
1.2
2.4
0.14
0.14
0.14
0.14
0.14
0.14
0.20
Approx.2 Approx.1
1 Coil Latching  Reset(Max) Reset
PL-003
PL-004
PL-005
PL-006
PL-009
PL-012
PL-024
3
4.5
5
6
9
12
24
8.7
13.0
14.5
17.4
26.1
34.8
57.6

90
202.5
250
360
810
1440
3840
2.25
3.38
3.75
4.50
6.75
9.00
18.0
-2.25
-3.38
-3.75
-4.50
-6.75
-9.00
-18.0
0.10
0.10
0.10
0.10
0.10
0.10
0.15
Approx.2 Approx.1
2 Coil Latching Set Coil Reset Coil Reset(Max) Reset
PK-003
PK-004
PK-005
PK-006
PK-009
PK-012
PK-024
3
4.5
5
6
9
12
24
6
9
10
12
18
24
36
45
101
125
180
405
720
1920
45
101
125
180
405
720
1920
2.25
3.38
3.75
4.50
6.75
9.00
18.0
2.25
3.38
3.75
4.50
6.75
9.00
18.0
0.20
0.20
0.20
0.20
0.20
0.20
0.30
Approx.2 Approx.1

CAUTION:
1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay.
2.Pickup and release(reset) voltage are for test purposes only and are not to be used as design criteria.
3.When latching relays are installed in equipment, the latch and reset coil should not be powered simultaneously. Coil should not be pulsed with less than the nominal coil voltage and pulse width should be a minimum of three times the specified operate time of the relay. If these conditions are not followed, it is possible for the relay to be in the magne-tically neutral position .

 

Characteristics
Electrostatic capacitance
Between open Contacts Approx.0.4pF Item 4.41 of IEC 61810-7
Between coil & Contacts Approx.0.9pF Item 4.41 of IEC 61810-7
Between Contact Poles Approx.0.2pF Item 4.41 of IEC 61810-7
Insulation Resistance 1000M min (at 500VDC) Item 7 of IEC 60255-5
Dielectric Strength
Between open Contacts
Between coil & Contacts
Between Contact Poles
1000VAC 1min
1000VAC 1min
1000VAC 1min
Item 6 of IEC 60255-5
Item 6 of IEC 60255-5
Item 6 of IEC 60255-5
Surge Withstand Voltage
Between open Contacts
Between coil & Contacts
Between Contact Poles
1500V
1500V
2500V
FCC 68
FCC 68
FCC 68
Shock resistance Functional:500m/s2 11ms;
Survival:1000 m/s2 6ms
IEC 68-2-27 Test Ea
Vibration resistance 10Hz~55Hz Double amplitude
Functional 3mm Survival:5mm
IEC 68-2-6 Test Fc
Terminals strength 5N IEC 68-2-21 Test Ua1
Solderability 235°C±2°C    3s°C±0.5s°C IEC 68-2-20 Test Ta method 1
Temperature Range -40°C ~70°C (-40°C ~158°C )
Mass Approx. 1.5g

 

Safety approvals
Safety approval UL&CUR T U V
Load 1A,2A/30VDC, 0.5A/125VAC 1A/30VDC, 0.5A/125VAC

 

 

Inquiry